Epson 2070 - LQ B/W Dot-matrix Printer Service Manual page 36

Printer status The rear PE sensor detects that paper is loaded in the rear paper path.
Release lever position is set to Fri&ion.
Table 1-38 Paper Handling Sequence 5
Occurrence
Pause button pressed
button held down continuously
LF / FF button pressed, and paper is
advanced over the logical paper length.
Load /Eject button pressed
Micro Adjust ~ button pressed
Micro Adjust ~ button pressed
Release lever set to the tractor position
Front paper end sensor detects that paper
was loaded in the rear paper path.
. Printer status Front PE sensor detects that paper is loaded in the rear paper path
The release lever position is set to Friction.
Trigger
Pause button pressed
LF / FF button pressed, and paper advanced
more than the logical paper length.
Load /Eject button pressed
Micro Adjust ? button pressed
Micro Adjust $ button pressed
Release lever set to tractor position
Front paper end sensor detects that paper
was loaded on the rear paper path.
Printer goes on or off line.
Printer performs a line feed.
Printer ejects paper forward after the line feed
(except with roll paper).
The printer performs a form feed after the line
feed (roll paper).
Paper is ejeded forward (except with roll paper).
The printer petfonns a form feed (roll paper).
The printer petforms a form feed (roll paper).
The printer micro feeds paper forward.
The printer micro feeds paper backward.
The beeper sounds.
The beeper sounds.
Table 1-39 Paper Handling Sequence 6
Result
Paper is ejected forward (except with roll paper).
Result
Printer goes on or off line.
Printer Derforms a line feed.
Paper is ejected forward after the line feed.
The paper is ejected forward.
The paper is ejected forward.
The printer micro feeds paper fotward.
The printer micro feeds paper backward.
The beeper sounds.
The beeper sounds.
Product Description
I
1-27