Toshiba RD-XS34 Owner's Manual page 107

OPEN/CLOSE
DVD
TOP MENU MENU RETURN
ANGLE SUBTITLE AUDIO CHANNEL
HDD TIMESLIP
INSTANT REPLAY
EASY
NAVI
REC MENU EDIT MENU
LIBRARY
ENTER
PAUSE STOP
REC
REMAIN DISPLAY TIME BAR CHP DIVIDE
Notes
• A title or a chapter becomes a title by being copied.
• "Same Disc" job using a DVD-RAM disc will take a longer time.
• "Same Disc" is not available on DVD-R/RW.
• "Move" is not available between the HDD and DVD-R/RW.
• Some parts in DVD-R/RW may be divided if dubbed.
• For a copy-once permitted content, only moving from the HDD to a DVD-RAM disc is available. Executing this will delete the
original content in the HDD, and the one moved to a DVD-RAM will not be able to moved or copied.
• "High speed dubbing" is not available between the HDD and DVD-R/RW recorded on other equipment.
• If you record a title directly onto a DVD-R/RW in the DVD-Video mode on this recorder and execute "High speed dubbing" on
the title to the HDD, the recorder may display a message to initialize the HDD. In this case, delete the title or execute "All
HDD titles delete" ( page 163).
To cancel copying halfway through the
operation
1) During copying, press QUICK MENU.
The Quick Menu appears.
2) Press / to select "Cancel dubbing", then
press ENTER.
RD-XS34SB_Ope_E_p103-117
4
Press
Disc".
ENTER
DVD
INSTANT SKIP
CONTENT MENU
5
Press ENTER.
PLAY
ENTER
QUICK MENU
107
/ to select "Copy", "Move" or "Same
Copy:
After the operation is completed, a specified part will
remain on the disc where it was previously located.
Move:
A part will move to the opposite disc and will be erased
from the disc where it was previously located.
Same Disc:
A part will be copied to the same disc and the copied
part will become another title.
This operation is useful to change a Playlist to Original.
"Copy" or "Move" is automatically selected in the
following cases.
Copy:
When a specified title (or chapter) is a Playlist.
When a specified title (or chapter) is locked (
Move:
When a specified title (or chapter) is copy-protected.
Copying starts.
The job progress is displayed on the screen and the
front panel display.
When the job finishes, the graph disappears and the
buzzer sounds.
You can set the recorder to turn off automatically when
the job finishes.
(1) During the operation, press the QUICK MENU button.
(2) Press the / buttons to select "Auto power off".
(3) Press the ENTER button.
Notes
• Cancellation of a copying operation will result in deletion of
a portion of the title or chapter already copied.
• Cancellation of a copying to a DVD-R cannot restore the
disc space in the DVD-R.
12/18/04, 5:47 PM
page 52).
107