Attach Imager Box To Projector - Sanyo POAMD07MCI - Digital AV Player Install And Operation Instructions

Attach Imager Box to Projector

CAUTION : Turn off the projector when attaching the Imager Box to the projector.
Do not attach or remove while the projector is turned on. It may damage
the equipment.
1 Remove 4 covers attached to a projector. Insert the
MOUNTING HOOKs (A) into the projector to the arrow
direction. (Fig.-1)
Plug the CONNECTOR PLUG into the DVI Terminal of the
2
projector while pressing the Imager Box LATCH BUTTON,
and release it.
(Fig.-1)
The SWITCH BUT-
TON of the Imager
Box is placed on
the switch of the
projector.
(A)
DVI Terminal
R – AUDIO IN – L
S – VIDEO
MCI
COMPUTER IN
ANALOG
cover
LATCH BUTTON
(Fig.-2)
VIDEO
(MONO) Y – Pb / Cb – Pr / Cr
AUDIO IN
R – AUDIO OUT – L
COMPUTER
USB CONTROL PORT
CONNECTOR
PLUG
Remove 4 covers.
5