Sanyo POAMD07MCI - Digital AV Player Install And Operation Instructions page 12

IMAGE PLAYBACK (OPERATING PROJECTOR)
When a memory card is loaded into Imager Box connected to the projector, MCI mode is
automatically selected. The first Page of the latest Index in a memory card is displayed on a
screen.
To switch to MCI mode manually, operate as follows.
DIRECT OPERATION
Choose Computer by pressing INPUT button on
Top Control or on Remote Control Unit.
If projector cannot reproduce proper image, select
correct input source through MENU OPERATION.
MENU OPERATION
1 Press MENU button and ON-SCREEN MENU
will appear. Press POINT LEFT/RIGHT button
to move a red frame pointer to INPUT Menu
icon.
2 Press POINT DOWN button to move a red
arrow pointer to Computer and then press
SELECT button. Source Select Menu will
appear.
3 Move a pointer to MCI and then press SELECT
button.
Quit
Closes Source Select Menu.
Image data edited with Media Card Imager
(software) is Index format consisting of several
Pages. To project desirable image, select Index
and then select Page in the Index.
12
SELECTING INPUT SOURCE
INDEX AND PAGE
INPUT button
Computer
Video
INPUT MENU
INPUT Menu icon
Move a pointer (red arrow)
to Computer and press
SELECT button.
Select Index
Index
Source Select Menu
Move a pointer to MCI
and press SELECT
button.
Pages in Index