Setting The Drive Mode - Polaroid CIM-1237R User Manual

• Setting the Drive Mode

Your camera features a Self-timer and Burst
settings which can be set in the Drive mode
function in the Record Menu. The Self-timer
allows you to take photos after a pre-defined delay.
While Burst lets you take consecutive shots. This
function is only available in recording still images.
The Drive mode setting is automatically set to off
when youturn off the camera.
To set the Drive Mode
1. From the Record menu, select Drive Mode.
2. Use the or
selection.
3. Press the OK button to save and apply
changes.
The table below shows the available Drive mode settings.
Icon
10 Sec Self-timer
10
2 Sec Self-timer
2
2
Double Self-timer
x
Burst
Off
Polaroid i1237 Digital Camera User Guide
www.polaroid.com
keys to go through the
Item
Sets a 10-second delay to capture image after pressing the
shutter button.
Sets a 2-second delay to capture image after pressing the
shutter button.
Performs delay and capture twice:
• Performs a 10-second delay, then captures the image.
• Performs another 2-second delay then captures the
image again.
Press and hold the shutter button down to capture images
continuously. Release the shutter button to stop.
Captures an image without time delay.
Record Mode
Drive Mode
AEB
AF Area
AF Lamp
Sharpness
Record Mode
10 sec.
10
Drive Mode
2 sec.
2
AEB
Double
2
x
AF Area
Burst
AF Lamp
Off
OFF
Sharpness
Description
OFF
OFF
OFF
OFF
45