Setting The Drive Mode - Polaroid t1232 User Manual

• Setting the Drive Mode

Your camera features a Self-timer and Burst
which can be set in the Drive mode function in
the Record Menu. The Self-timer allows you to
take photos after a pre-defined delay. While Burst
lets you take consecutive shots. This function is
only available in recording still images. The Drive
mode setting is automatically set to off when you
turn off the camera.
To set the Drive Mode
1. From the Record menu, select Drive Mode.
2. Use the or DISP keys to go through the
selection.
3. Press the SET button to save and apply
changes.
The table below shows the available Drive mode settings.
Icon
10 Sec Self-timer
10
2 Sec Self-timer
2
2
Double Self-timer
x
Burst
Off
Polaroid t1232 Digital Camera User Guide
www.polaroid.com
Item
Sets a 10-second delay to capture image after pressing the
shutter button.
Sets a 2-second delay to capture image after pressing the
shutter button.
Performs delay and capture twice:
• Performs a 10-second delay, then captures the image.
• Performs another 2-second delay then captures the
image again.
Performs continuous shooting when the shutter button is
pressed and held down. Stops shooting when the shutter
button is released.
Captures an image without time delay.
Record Mode
Drive Mode
AEB
AF Area
AF Lamp
Sharpness
Record Mode
10 sec.
10
Drive Mode
2 sec.
2
AEB
Double
2
x
AF Area
Burst
AF Lamp
Off
OFF
Sharpness
Description
OFF
OFF
OFF
OFF
47