Lenovo 3246A2U User Manual page 41

9. To install a new hard disk drive into the blue bracket, flex the bracket and
align pin 1 , pin 2 , pin 3 , and pin 4 on the bracket with the
corresponding holes in the hard disk drive. Do not touch the circuit board 5
on the bottom of the hard disk drive.
Figure 26. Installing the hard disk drive into the bracket
10. Slide the new hard disk drive into the hard disk drive cage until it snaps into
position.
11. Install the hard disk drive cage into the chassis until it snaps into position
underneath the metal tab. Make sure that the hard disk drive cage release
button is secured in the chassis.
Figure 27. Installing the secondary hard disk drive
12. Connect the signal cable and the power cable to the new hard disk drive.
Chapter 2. Installing or replacing hardware
33