NOTE:
NOTE:
The FPT tool version is by case.
NOTE:
NOTE:
The command is by case.
4) After finishing flashing BIOS, please don't execute any programs and power off system.
5) Please replace "FLASH_OVERRIDE" jumper from Pin 2-3 to Pin 1-2.
6) Unplug AC power cord for 10 sec.
7) Reconnect the power cord
8) Power on the system and please press "Del" to enter BIOS Setup.
9) In Exit page, select "Load Default Settings" and press "Enter" key.
System Utilities
2-29