Monitor The Input Signal (Monitor) - Teac DR-2d Owner's Manual

3 Use the wheel to select
FORMAT
ENTER/MARK key.
4 Use the wheel to select
WAV 16-bit
/HOME [ª] key to return to the Home
5 Press the
Screen.

Monitor the input signal (MONITOR)

1 Press MENU to open the Menu Screen.
2 Use the wheel to select
MONITOR
and press the ENTER/MARK key.
screen appears.
MONITOR
and press the ¯ key or
or .
WAV 24-bit
(highlighted in inverse)
3 Use the wheel to select
INPUT
ENTER/MARK key.
4 Use the wheel to select ON.
Input monitoring is now enabled.
5 Press the  key to highlight
6 Use the wheel to select PB INPUT and press the ¯ key
or ENTER/MARK key.
7 Use the wheel to adjust the playback volume level in a
range from 0 to 20.
/HOME [ª] key to return to the Home
8 Press the
Screen.
4–Recording
and press the ¯ key or
.
INPUT
41
TASCAM DR-2d