NETGEAR WAG302v1 - ProSafe Dual Band Wireless Access Point Technical Specifications page 2

WAG302
Package Contents
- ProSafe Dual Band Wireless
Access Point WAG302
- Two (2) 5 dBi
Detachable Antennas
- Resource CD
- Power adapter
- Ethernet cable
- Wall Mounting Kit
- Installation guide
- Warranty/support information card
System Requirements
- PC or laptop, configured for an
Internet connection, with
Windows 98, Me, 2000 or XP
®
and 802.11b, 802.11g and/or
802.11a Wi-Fi adapter card
NETGEAR Related Products
- WAG511 ProSafe Dual Band PC
Card with AutoCell
- FS108P ProSafe 8 Port Fast
Ethernet Switch with PoE
- FVS318 ProSafe VPN Firewall 8
- FVS338 ProSafe VPN Firewall 50
- FVX538 ProSafe VPN Firewall 200
- WG102 ProSafe 802.11g
Access Point
- WG302 ProSafe 802.11g
Access Point
- FSM7326P 24 Port Layer 3
Managed Switch with PoE
- NMS100 ProSafe Network
Management Software
4500 Great America Parkway
Santa Clara, CA 95054 USA
Phone: 1-888-NETGEAR (638-4327)
E-mail: info@NETGEAR.com
www.NETGEAR.com
©2005 NETGEAR, Inc. NETGEAR®,
Everybody's connecting®, the Netgear
logo, Auto Uplink, ProSafe, Smart Wizard
and RangeMax are trademarks or regis-
tered trademarks of NETGEAR, Inc. in the
United States and/or other countries.
Microsoft, Windows, and the Windows logo
are trademarks or registered trademarks of
Microsoft Corporation in the United States
and/or other countries. Other brand and
product names are trademarks or registered
trademarks of their respective holders.
Information is subject to change without
notice. All rights reserved.
* Free basic installation support provided
for 90 days from date of purchase.
Advanced product features and configura-
tions are not included in free basic installa-
tion support; optional premium support
available.
D-WAG302-0
ProSafe™ Dual Band Wireless
Access Point
Technical Specifications
• Wireless:
- Standards: IEEE 802.11a, IEEE 802.11g,
IEEE 802.11i* , IEEE 802.11e
- Antennas: Two (2) 5 dBi detachable
- Typical maximum power output: 802.11a
(15 dBm), 802.11g (20 dBm)
- Typical maximum receive sensitivity: 802.11a
(89 dB), 802.11b/g (87dBm)
Note: Maximum Tx varies based on country and/or region
selection to ensure local regulatory compliance.
• Physical Interfaces:
- LAN Port: One (1) 10/100BASE-T Ethernet (RJ-45)
port with Auto Uplink and IEEE 802.3af Power
™
over Ethernet (PoE) support
- Power adapter: Output 12 VDC, 1.2 A; plug is
localized to country of sale
- Five (5) LEDs: Power, Test, 100 Mbps, Link/ACT,
and WLAN 802.11g, WLAN 802.11a
- Console Port: One (1) with standard RS-232C
interface with DB-9 male connector
- Antenna Connectors: Two (2) 5 dBi reverse SMA
• Network Management:
- Remote configuration and management through
Web browser, SNMP or Telnet with command
line interface (CLI)
- SNMP management supports SNMP MIB I,
MIB II, and 802.11 MIB
• Advanced Wireless Features:
- Bridging and repeater mode
- Simultaneous wireless bridge and access point mode
- Adjustable transmit power control 100 mW
down to 0 mW
• Receive Sensitivity:
- 802.11b
1 Mbps -93 dBm
2 Mbps -92 dBm
5.5 Mbps -92 dBm
11 Mbps -89 dBm
- 802.11g
6 Mbps -93 dBm
9 Mbps -90 dBm
12 Mbps -90 dBm
18 Mbps -88 dBm
24 Mbps -84 dBm
36 Mbps -80 dBm
48 Mbps -76 dBm
54 Mbps -75 dBm
- 802.11a
6 Mbps -89 dBm
9 Mbps -88 dBm
12 Mbps -87 dBm
18 Mbps -86 dBm
24 Mbps -82 dBm
36 Mbps -79 dBm
48 Mbps -73 dBm
54 Mbps -69 dBm
• Security:
- IEEE 802.11i Wi-Fi Protected Access (WPA-2)*
- Block SSID Broadcast
- VPN pass-through support
- MAC address filtering with access control lists
up to 255 users
- 802.1x RADIUS support with EAP TLS, TTLS, PEAP
- Secure SSH Telnet
- Secure Socket Layer (SSL) remote management login
- Wireless isolation enables peer-to-peer blocking so users
may not access another user's PC
• Standards, Safety and
Electromagnetic Conformance:
- IEEE 802.3af Power over Ethernet (PoE)
- FCC Part 15 Subpart B and Subpart C
- CE EN60950, EN 300328-2 v1.1.1 (2000-07),
EMC EN301489-1 v1.2.1 (2000-08), and
EN301489-17 v1.1.1 (2000-09), EN55022(B),
CISPR22(B), AS/NZS 3548(B)
• Physical Specifications:
- Dimensions: 25.4 x 17.8 x 3.18 cm (10 x 7 x 1.25 in.)
- Weight: 996.15 g (2 lbs. 13 oz.)
- Processor: 266 MHz Intel XScale IXP 422B
Memory: 16MB Flash, 32MB DRAM
- Power over Ethernet required: 10 W
• Environmental Specifications:
- Operating temperature: 0 to 40° C (32 to 104° F)
- Operating humidity: 90% maximum relative
humidity, noncondensing
• Warranty:
NETGEAR 3-year warranty
Antennas and Accessories
- ANT24O5 5 dBi Omni-directional antenna
- ANT2409 9 dBi Indoor/Outdoor
-87dBm
Omni-directional Antenna
-84dBm
- ANT24D18 18 dBi Indoor/Outdoor
-83dBm
Directional Antenna
-80dBm
- Four (4) antenna cable lengths: 1.5, 3, 5 and 10 m
-82dBm
AutoCell RF Management and Control
-81dBm
AutoCell RF Management technology is sophisticated
-79dBm
cognitive radio software embedded in the WAG302 firmware
-77dBm
that is accessed via the user interface. The AutoCell-enabled
-74dBm
WAG302 monitors radio frequency (RF) patterns and
-70dBm
automatically tunes the access point signal strength and channel
-66dBm
selection to avoid interference to achieve optimum performance.
-65dBm
An evaluation copy of the separately sold AutoCell View
monitoring software is available on the Resource CD.