Charging Battery - Panasonic Lumix DMC-FH4 Owner's Manual

Advanced features
Hide thumbs Also See for Lumix DMC-FH4:
Table of Contents

Advertisement

Charging battery

Always charge before first use! (battery shipped uncharged)
About batteries that you can use with this unit
It has been found that counterfeit battery packs which look very similar to the
genuine products are made available to purchase in some markets. Some of
these battery packs are not adequately protected with internal protection to
meet the requirements of appropriate safety standards. There is a possibility
that these battery packs may lead to fire or explosion. Please be advised that
we are not liable for any accident or failure occurring as a result of use of a
counterfeit battery pack. To ensure that safe products are used we recommend
that a genuine Panasonic battery pack is used.
• Use the dedicated charger and battery.
Insert the battery terminals and attach the battery
to the charger
Connect the charger to the electrical outlet
Plug-in type
Battery
Charger
(model-specific)
Charge the battery with the charger indoors
(10 °C to 30 °C (50 °F to 86 °F)).
Detach the battery after charging is
completed
The battery charger is in the standby condition when the AC power is supplied.
The primary circuit is always "live" as long as the battery charger is connected to
an electrical outlet.
Inlet type
• The AC
cable does
not fit
entirely into
the AC input
terminal. A gap will remain.
- 10 -
Charging light
([CHARGE])
On: Charging in progress
(approx. 120 min. if fully
depleted)
Off: Charging complete
If light is flashing:
• Charging may take longer
than normal if battery
temperature is too high or
too low (charging may not be
completed).
• Battery/charger connector is
dirty. Clean with a dry cloth.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-fh6Dmc-fh6kDmc-s2v

Table of Contents