Using The Nose Cap - Hitachi Koki NV75AG - 3" Utility Coil Nailer Instruction And Safety Manual

English

USING THE NOSE CAP

If you like to protect the surface of workpiece against
scratches or markings made by the push lever, attach the
accessory nose cap to the push lever.
1 DISCONNECT AIR HOSE FROM NAILER.
2 Put the nose cap to the toe of the push lever.
NOTE:
The nose cap may reduce nailing depth due to its
thickness. Re-adjustment of nailing depth is required.
Push Lever
Nose Cap
Nose cap can be removed from the push lever using a
screwdriver or thin rod.
Nose cap
Nose cap can be stored on the magazine as shown below.
Magazine
Nose cap
Nose
Hole
Protrusion (Inward)
1
Do not connect
air hose
Screwdriver
Push lever
— 16 —