VTech InnoTab Interactive Learning App Tablet User Manual page 8

• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than the recommended number
of power supplies.
• Do not dispose of batteries in fire.
NOTE: When InnoTab
batteries, you may see this icon appear on the
screen . This indicates that battery power
is low, and you should replace the batteries
soon. Battery time remaining once the icon
first appears is approximately 10-30 minutes,
depending on the type of batteries in use.
After that, InnoTab
and then will turn off automatically.
To preserve battery life, InnoTab
is no input for 8 minutes.
AC Adaptor
• Use a standard 7.5V
We recommend the use of a VTech ® 7.5V 400mA / 9V 300mA AC/DC
adaptor.
Using a VTech adaptor (AC/DC 7.5V 400mA or 9V 300mA) that complies
with UL697 or cUL697 is recommended.
• Make sure the tablet is turned off.
• Plug the adaptor into the AC Adaptor Jack on the top of InnoTab
• Plug the adaptor into a wall socket.
NOTE: The use of an adaptor will override the batteries. When the toy
is not going to be used for an extended period of time, unplug
the adaptor.
5
is running on
TM
will show the very low battery screen for 3 seconds,
TM
will shut down automatically when there
TM
400mA or 9V 300mA AC/DC adaptor.
.
TM