Connecting A Dvi Device; Connecting A Computer Using Vga - Insignia NS-22E430A10 User Manual

19" 720p LED HDTV/ 22" 1080p LED HDTV

Connecting a DVI device

To connect a DVI device:
1 Make sure that your TV is turned off and the
power cord is disconnected.
2 Connect one end of an HDMI-to-DVI cable to the
HDMI INPUT jack on the back of your TV, then
connect the other end of the cable to the
DVI OUT jack on the external device.
Audio cable
3 Connect an audio cable to the VGA AUDIO
INPUT jack on the back of your TV, then connect
the other end of the cable into the AUDIO OUT
jack on the DVI device.
Note
An HDMI-to-DVI cable transfers video only. Separate
analog audio cables are required.
4 Turn on your TV.
5 Press INPUT on the remote control or the side of
your TV to display the input source menu, then
press INPUT repeatedly or press
HDMI. Press OK/ENTER.
Back of TV
DVI device
HDMI-to-DVI
cable
or to select
www.insigniaproducts.com

Connecting a computer using VGA

Note
You can also connect a computer using an HDMI
connection. For more information, see "Connecting a
computer using HDMI or DVI" on page 14.
To connect a computer using VGA:
1 Make sure that your TV is turned off and the
power cord is disconnected.
2 Connect a VGA cable to the VGA INPUT jack on
the back of your TV, then plug the other end of
the cable into the VGA jack on the computer.
3 Connect an audio cable to the
VGA AUDIO INPUT jack on the back of your TV,
then connect the other end of the cable into the
LINE OUT jack on the computer.
4 Turn on your TV.
5 Press INPUT on the remote control or the side of
your TV to display the input source menu, then
press INPUT repeatedly or press
VGA. Press OK/ENTER.
Back of TV
or to select
13