Hp Eva Virtualizaton Error Messages - HP 6100 Administrator's Manual

HP EVA Virtualizaton Error Messages

Table 1 EVA Virtualization Adapter log messages
Log Message
Array <EVA ID>s being actively managed by
a different SMA
Could not create snapshot
Could not determine DR Group membership
of one or more virtual disk
Could not find the specified VDisk: <LUN ID>
Could not populated array information
Could not populated list of managed arrays
Creating snapshot of <LUN ID>
Data Replication Group for <DR Group>
already in source mode
Failover of DR Group <DR Group name> was
unsuccessful
Initialization of CV Client failed using IP ad-
dress <management host address>
Initialization of the Element Manager object
failed
No test snapshots found
Presentation of the vdisk <LUN ID> to the host
<host name> has failed
previously created SRM snapshot found
Storage Array <EVA ID> not found on current
management host
Successfully deleted <SRM test snapshot name>
There are no Data Replication Groups to fail-
over
VDisk <LUN ID> is not a member of a known
Data Replication Group
Description
The array being requested by SRM is actively managed by a
different Command View EVA host.
During a test failover operation, the action to create a snap-
shot failed due to an internal error on the EVA.
A LUN ID was input from SRM to the adapter, but it could not
be found in any existing DR Group.
A LUN ID was input from SRM to the adapter, but it could not
be found on the EVA.
A connection was made to Command View EVA, but the EVA
information could not be obtained.
A connection was made to Command View EVA, but the EVA
information could not be obtained.
A snapshot of the replicated LUN is currently being created.
A LUN ID input from SRM has already been failed over at the
DR Group level.
During a failover of a DR Group associated with a replicated
LUN, an error occurred.
The address or login credentials to the management host may
be incorrect, preventing the adapter from connecting.
Connection to the Command View EVA host could not be
initialized.
A test failover stop operation was called, but no test snapshots
from the test failover stop operation exists.
During a test failover operation, the presentation of a snapshot
to a ESX host failed due to an internal error on the EVA.
During test failover start or stop, a test SRM snapshot has been
detected on the array.
The array being requested by SRM is actively managed by a
different Command View EVA host.
During test failover stop, a test SRM snapshot has been de-
leted.
All replicated LUNs specified by SRM are already in a failed
over state, or do not belong to a DR Group.
A LUN ID input from SRM does not belong to any known DR
Group.
EVA Virtualization Adapter administrator guide 31