Dukane 8806 User Manual page 110

NOTE:
• Before setting the Program Timer, make sure that the [Date, Time Preset] feature is set. ( → page 96)
• Make sure that the projector is in the stand by condition with the Main Power Switch on.
• The projector has a built-in clock. The clock will keep working for about two weeks after the main power is turned off. If the main
power is not supplied to the projector for two weeks or more, the built-in clock stops working.
Setting the Program Timer
1. On the Program Timer screen, use the SELECT
press the ENTER button.
The [Edit] screen will be displayed.
2. Set the turn-on time.
2-1. Use the SELECT
button or OK button.
The day of week pull-down list will be displayed.
2-2. Select a day of the week and press the ENTER button.
2-3. Use the SELECT
• Enter time in 24-hour format
Example: Enter "06" to set 6:00 A.M. and "18" to set 6:00 P.M.
3. Set the turn-off time.
3-1. Use the SELECT
button or OK button.
The day of week pull-down list will be displayed.
3-2. Select a day of the week and press the ENTER button.
3-3. Use the SELECT
• Enter time in 24-hour format
Example: Enter "06" to set 6:00 A.M. and "18" to set 6:00 P.M.
4. Set the Repeat option.
• To repeat the setting in weekly basis, use the SELECT
the ENTER button.
A check mark will be placed in the [Repeat] check box.
NOTE: To use the setting this week only, do not place a check mark in the [Repeat] check box.
or button to select
or button to select
or button to select
or button to select
100
6. Using On-Screen Menu
or button to select a program number (No. 1 to 14) and
(the day of week) for [On Time] and press the SELECT
(the time) for [On Time] and enter time.
(the day of week) for [Off Time] and press the SELECT
(the time) for [Off Time] and enter time.
or button to select the [Repeat] check box and press