Advertisement
Power Supply
Cord
Direct Wire
ElectricaB Shock Hazard
Disconnect
power before servicing°
Use a new 40 amp power suppmy cord,
Pmug into a grounded
outlet.
Failure to follow these instructions can result in death,
fire, or emectrical shock,
Electrical
Shock Hazard
Disconnect power before servicing.
Use 8 gauge copper
or G gauge amuminum wire,
EmectricaHy ground
range.
Failure to follow these instructions
can resumt in death,
fire, or electricam shock.
1. Disconnect
power.
3.
2. Remove the terminal block cover screws located on the back
of the range. Pull cover down and toward you to remove
cover from range.
'B
Add strain relief.
Style 1: Power supply cord strain relief
•
Remove the knockout for the power supply cord.
•
Assemble a UL listed strain relief in the opening.
j=_
_
..... A
A. UL listed strain relief
•
Tighten strain relief screw against the power supply cord.
A. Two mounting tabs each side
B. Terminal block cover
C. Hex-head screws
Advertisement
