Panasonic KX-MB1500 Operating Instructions Manual page 49

Operating instructions
Table of Contents

Advertisement

Feature/Code
Setting the recording paper
type for paper input tray
MBNM3NM8NM3N
Setting the recording paper
type for manual input tray
MBNM3NM8NM4N
Setting the waiting time for
the power save mode
MBNM4NM0NM3N
Holding the previous contrast
setting
MBNM4NM6NM2N
Setting the default operation
mode
MBNM4NM6NM3N
(KX-MB1520 only)
Setting the default operation
mode timer
MBNM4NM6NM4N
(KX-MB1520 only)
Setting toner save feature
MBNM4NM8NM2N
Selection
M1N "PLAIN PAPER" (default): 75 g/m² to 90 g/m² (20 lb to 24 lb) paper.
M2N "THIN PAPER": 64 g/m² to 75 g/m² (17 lb to 20 lb) paper.
Note:
R This setting will be deactivated when printing from a computer. To set the
recording paper type for printing, see page 24.
M1N "PLAIN PAPER" (default): 75 g/m² to 90 g/m² (20 lb to 24 lb) paper.
M2N "THIN PAPER": 64 g/m² to 75 g/m² (17 lb to 20 lb) paper.
M3N "THICK PAPER": 90 g/m² to 165 g/m² (24 lb to 44 lb) paper.
Note:
R This setting will be deactivated when printing from a computer. To set the
recording paper type for printing, see page 24.
To set the length of time before the unit enters power save mode.
M1N "5min" (default): 5 minutes
M2N "15min": 15 minutes
M3N "30min": 30 minutes
M4N "1h": 1 hour
Note:
R When in power save mode, the unit needs to preheat the fuser unit before
it can begin printing.
M0N "DISABLED" (default): Deactivates this feature.
M1N "ENABLED": The unit will hold the previous setting.
Note:
R The previous setting will be held individually for copying.
R The previous setting will be held individually for sending faxes (KX-MB1520
only).
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
M1N "COPY" (default): Copy mode is selected as default.
M2N "FAX": Fax mode is selected as default.
Note:
R You cannot select the scan mode using this feature.
To set the timer before returning to the default operation mode (feature #463).
M0N "OFF": Deactivates this feature.
M1N "30s": 30 seconds
M2N "1min" (default): 1 minute
M3N "2min": 2 minutes
M4N "5min": 5 minutes
M0N "OFF" (default): Deactivates this feature.
M1N "ON": The toner cartridge will last longer.
Note:
R This feature may lower the print quality by reducing toner consumption.
R This setting is valid for copying, and when the unit prints reports/lists.
R This setting is invalid for printing received faxes (KX-MB1520 only).
9. Programmable Features
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-mb1520

Table of Contents