Chipset - Asus K8N-E User Manual

2.4.4 Chipset

The items in this menu show the chipset-related information auto-detected by
BIOS.
Memory CLK : 200 MHz
CAS Latency : 2.5
DRAM RAS TO CAS Delay : 3 CLK
DRAM ACTIVE TIME : 8 CLK
DRAM RAS PRECHANGE TIME : 3 CLK
MemClock Mode
MCT Timing Mode
1T/2T Timing
Master ECC Enabled
Audio CODEC Interface
Primary Video
Aperture Size
AGP FW Enable
AGP SideBand Address
Onboard Device
USB Configuration
Memclock Mode [ Auto]
Allows you to set the memory clock mode. Set by the code using [Auto] or select
[Manual] to set using one of the standard values.
Configuration options: [Auto] [Manual]
MemClock Value [200 MHz]
Sets the Memory clock value. This item appears only when the MemClock Mode
item is set to Manual. Configuration options: [200 MHz] [266 MHz] [333 MHz]
[400 MHz]
MCT Timing Mode [Auto]
Sets the MCT timing mode. Configuration options: [Auto] [Manual]
CAS Latency (CL) [Auto]
Sets the CAS Latency value. Configuration options: [Auto] [2.0] [2.5] [3.0]
DRAM RAS TO CAS Delay [4 CLK]
Sets the DRAM RAS TO CAS Delay.
Configuration options: [Auto] [2 CLK] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
DRAM RAS PRECHANGE Time [4 CLK]
Sets the DRAM RAS PRECHANGE Time.
Configuration options: [Auto] [2 CLK] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
ASUS K8N-E
[Auto]
[Auto]
[Auto]
[Enabled]
[Auto]
[PCI]
[ 128 MB]
[Auto]
[Auto]
MEMCLK can be set
by the code using
AUTO, or if you use
LIMIT, you can set
one of the standard
values.
2-17