Biostar TA770 A2 Bios Setup Manual page 10

Bios setup
Hide thumbs Also See for TA770 A2:
Table of Contents

Advertisement

TA770 A2+ SE BIOS Manual
Serial Port1 Address
Select an address and corresponding interrupt fo r the first and second seri al ports.
Options:
3F8/IRQ4 (Default) / 2F8/IRQ3 / 3E8/IRQ4 / 2E8/IRQ3 / Auto / Disabled
Parallel Port Address
T his item allows you to determine access onboard p arallel port controller with which
I/O Address.
Options:
378 (Default) / 278 / 3BC / Disabled
Parallel Port Mode
T his item allows you to determine how the parallel port should function.
Options:
Normal (Default)
EPP
ECP
ECP+EPP
Parallel Port IRQ
T his item allows you to select the IRQ for the onboard parallel port.
Options:
IRQ7 (Default) / IRQ5 / Disabled
Keyboard Pow erOn
T his item allows you to control the keyboard power on function.
Options:
Disabled (Default) / Enabled
Mouse PowerOn
T his item allows you to control the mouse power on function.
Options:
Disabled (Default) / Enabled
Restore on AC Power Loss
T his setting specifies how your system should behave after a power fail or interrupts
occurs. By choosing Disabled will leave the computer in the power off state.
Choosing Enabled will restore the system to the status before power failure or
interrupt occurs.
Options:
Power O ff (Default) / Power ON / Last State
Using Parallel port as Standard Printer Port.
Using Parallel Port as Enhanced Parallel Port.
Using Parallel port as Extended Capabilities Port.
Using Parallel port as ECP & EPP mode.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ta770a2seTa770 a2+ se

Table of Contents