Bios Menu Screen - Asus E45M1-M PRO User Manual

BIOS menu screen

The BIOS setup program can be used under two modes: EZ Mode and Advanced Mode.
You can change modes from the Exit menu or from the Exit/Advanced Mode button in the
EZ Mode/Advanced Mode screen.
EZ Mode
By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ
Mode provides you an overview of the basic system information, and allows you to select
the display language, system performance mode and boot device priority. To access the
Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode.
The default screen for entering the BIOS setup program can be changed. Refer to the
Setup Mode item in section
Displays the CPU/motherboard temperature,
CPU/5V/3.3V/12V voltage output,
CPU/chassis/power fan speed
EFI BIOS Utility - EZ Mode
Friday [11/19/2010]
Temperature
CPU +113.0ºF/+45.0ºC
MB +75.2ºF/+40.0ºC
Q-Fan Control
Performance
Boot Priority
Use the mouse to drag or keyboard to navigate to decide the boot priority.
Selects the boot device priority
Displays the system properties of the
selected mode on the right hand side
• The boot device options vary depending on the devices you installed to the system.
• The Boot Menu(F8) button is available only when the boot device is installed to the
2-8
section 2.7 Boot menu for details.
Selects the display language of
the BIOS setup program
E45M1-M PRO
BIOS Version : 0202
CPU Type : AMD E-450 APU with Radeon(tm) HD Graphics Speed : 1650 MHz
Total Memory : 1024 MB (DDR3 1333MHz)
Voltage
CPU 1.248V
3.3V 3.344V
Quiet
Energy Saving
Normal
Silent mode
system.
Exits the BIOS setup program without saving
the changes, saves the changes and resets
the system, or enters the Advanced Mode
Build Date : 07/13/2011
5V 5.160V CPU_FAN
12V 12.248V
Standard mode
Selects the boot device priority
Exit/Advanced Mode
English
Fan Speed
3325RPM CHA_FAN
Boot Menu(F8)
Default(F5)
Loads optimized default
ASUS E45M1-M PRO
N/A
Turbo mode