Asus E45M1-I DELUXE User Manual page 22

2. CPU and chassis fan connectors (3-pin CPU_FAN, 3-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
E45M1-I DELUXE Fan connectors
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the
system may damage the motherboard components. These are not jumpers! Do not place
jumper caps on the fan connectors!
• The CPU_FAN connector supports a CPU fan of maximum 2A (24 W) fan power.
• Only the CPU_FAN connector supports the ASUS Q-Fan feature.
3. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
E45M1-I DELUXE Digital audio connector
The S/PDIF module is purchased separately.
1-12
CHA_FAN
Rotation
+12V
GND
CPU_FAN
Rotation
+12V
GND
SPDIF_OUT
ASUS E45M1-I DELUXE