Biostar MCP6P-M2 Setup Manual page 18

Motherboard Manual
JSPDIF_O UT1: Digital Audio-out Conne ctor
This connector allows user to connect the PCI bracket SPDIF output header.
JCMO S1: Cle ar CMOS Heade r
By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting
and the CMOS data, please carefully f ollow the procedures to avoid damaging
the motherboard.
※ Clear CMOS Proce dures:
1. Remov e AC power line.
2. Set the jumper to "Pin 2-3 close".
3. Wait f or f ive seconds.
4. Set the jumper to "Pin 1-2 close".
5. Power on the AC.
6. Reset y our desired password or clear the CMOS data.
18
Pin
1
2
3
1 3
Pin 1-2 Close:
Normal Operation
(default).
1 3
Pin 2-3 Close:
Clear CMOS data.
Assignment
+5V
SPDIF_OUT
Ground
1 3
1 3