Asus CUEP2-M User Manual page 22

3. HARDWARE SETUP
7) CPU External Frequency Setting (DSW)
This option tells the clock generator what frequency to send to the CPU, DRAM,
AGP, and the PCI bus. This allows the selection of the CPU's External fre-
quency.
IMPORTANT:
1. In JumperFree mode, all dip switches must be set to OFF.
2. When JumperFree mode is enabled, use BIOS setup in place of these switches
(see CPU Internal Frequency in 4.4 Advanced Menu).
NOTE: Only selected switches are illustrated. For a complete frequency listing,
see next page.
CUEP2-M ®
CUEP2-M CPU External
Clock (BUS) Frequency
Selection
NOTE: If your processor does not have a locked Frequency Multiple, you must
use CPU Core:Bus Freq. Multiple in 4.4 Advanced Menu to set the Frequency
Multiple. If the Frequency Multiple is locked, setting the Frequency Multiple in
BIOS setup will have no effect.
WARNING!
Using a higher voltage may help when overclocking but may result
in the shortening of your computer component's life. It is highly recommended
that you leave this setting on its default.
22
DSW
CPU
SDRAM
AGP
PCI
CPU
SDRAM
AGP
PCI
ASUS CUEP2-M User's Manual
66MHz 100MHz 133MHz
100MHz 100MHz 133MHz
66MHz 66MHz 66MHz
33MHz 33MHz 33MHz
133MHz
(JumperFree Mode)
100MHz
66MHz
33MHz