Asus CUEP2-M User Manual page 20

3. HARDWARE SETUP
4) Onboard Audio CODEC Setting (AUD_EN1)
(available on audio model only)
The onboard audio CODEC may be enabled or disabled using all of these jump-
ers. Disable the onboard audio CODEC if you are using an ISA or PCI audio
card on any of the expansion slots or a primary audio/modem CNR on a CNR
slot (see CNR Slot later in this section). If using a PCI audio expansion card,
Onboard AC97 Audio Controller in 4.4.2 I/O Device Configuration must
also be disabled.
Setting
Enable
Disable
CUEP2-M
®
CUEP2-M Audio Codec Setting
5) Onboard LAN Setting (LAN_EN)
The onboard LAN may be enabled/disabled with this jumper.
Setting
Enable
Disable
CUEP2-M
®
CUEP2-M On Board Lan Setting
20
AUD_EN1
[1-2] (default)
[2-3]
Enable
(Default)
LAN_EN
[1-2] (default)
[2-3]
ASUS CUEP2-M User's Manual
AUD_EN1
1 2 2 3
Disable
LAN_EN
1 2 2 3
Enable Disable
(default)