Table of Contents
Advertisement
MP Table uses PCI entries
This option allows user to configure the MP Table with PCI interrupt entries.
Yes
MP Table uses with PCI interrupt entries. (Default)
No
Disable this function.
After Power Failure
This option provides user to set the mode of operation if an AC / power loss occurs.
Power On
System power state when AC cord is re-plugged. (Default)
Off State
Do not power on system when AC power is back.
Last State
Set system to the last sate when AC power is removed. Do not power on
system when AC power is back.
Connector and Jumper Setting Introduction
4 9
Advertisement
Table of Contents
