Southbridge Configuration - Asus A8V Deluxe User Manual

AGP Mode [AGP 8X]
Allows you to set the data throughput of your AGP graphics card. This
motherboard supports the AGP 8X interface that transfers video data at
2.12GB/s. The default and configuration options vary depending on the
speed of AGP card you installed. If you installed an AGP 8X graphics card,
the configuration options are as follows: [8X] [4X] or if you installed an
AGP 4X graphics card, the configuration options are as follows: [4X] [2X].
AGP Fast Write [Enabled]
Enables or disables the AGP Fast Write feature.
Configuration options: [Disabled] [Enabled]
Graphics Aperture Size [64MB]
Allows you to select the size of mapped memory for AGP graphic data.
Configuration options: [32MB] [64MB] [128MB] [256MB]
AGP 3.0 Calibration Cycle [Disabled]
Enables or disables the AGP 3.0 Calibration cycle.
Configuration options: [Disabled] [Enabled]
DBI Output for AGP Trans [Disabled]
Enables or disables the DBI Output for AGP trans.
Configuration options: [Disabled] [Enabled]

SouthBridge Configuration

The items in this menu allows you to change the Southbridge-related
features. Select an item then press <Enter> to display the configuration
options.
MPS Revision
PCI Delay Transaction
MPS Revision [1.4]
Sets the MPS revision value. Configuration options: [1.1] [1.4]
PCI Delay Transaction [Disabled]
Enables or disables the PCI Delay transaction feature.
Configuration options: [Disabled] [Enabled]
4-22
[1.4]
[Disabled]
Chapter 4: BIOS Setup