Promise ® Raid Configurations - Asus A8V Deluxe User Manual

5.6.2 Promise
®
The Promise
and Multi-RAID configurations. Use the MBFastTrak378™ BIOS and the
FastBuild™ utility to configure a disk array.
Refer to the FastTrak 378 Quick Start Guide and SATA Quick Start
Guide in the support CD for detailed information on RAID
configurations under different operating systems.
Entering the MBFastBuild™ utility
1. Boot the system.
If this is the first time you boot the system with the new hard disks
installed and connected to the ATAIDE connectors on the
motherboard, the MBFastTrak378™ BIOS displays the following:
MBFastTrak378 (tm) BIOS version 1.00
(c)2000-2005 Promise Technology, Inc. All Rights Reserved.
No Array defined...
Press <Ctrl-F> to enter FastBuild (tm) Utility
Or press <ESC> key to continue booting.
2. Press <Ctrl+F> to display the FastBuild™ utility main menu.
FastBuild (tm) Utility 2.00 (c) 2002-2005 Promise Technology, Inc.
Press 1..5 to select Option
5-20
®
RAID configurations
PDC20378 controller supports RAID 0, RAID 1, RAID 0+1,
[ Main Menu ]
Auto Setup . . . . . . . . . .
View Drive Assignments . . . . [ 2 ]
Define Array . . . . . . . . . [ 3 ]
Delete Array . . . . . . . . . [ 4 ]
Rebuild Array. . . . . . . . . [ 5 ]
[ Keys Available ]
[ 1 ] [ 1 ]
[ 2 ]
[ 3 ]
[ 4 ]
[ 5 ]
[ESC] Exit
Chapter 5: Software support