Gigabyte GA-6PXSV1 User Manual page 11

1-4 Installing the Memory
Read the following guidelines before you begin to install the memory:
• Make sure that the motherboard supports the memory. It is recommended that memory of the
same capacity, brand, speed, and chips be used.
(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)
• Always turn off the computer and unplug the power cord from the power outlet before installing
the memory to prevent hardware damage.
• Memory modules have a foolproof design. A memory module can be installed in only one direc-
tion. If you are unable to insert the memory, switch the direction.
1-4-1 Four Channel Memory Configuration
This motherboard provides four DDR3 memory sockets and supports Four Channel Technology. After the
memory is installed, the BIOS will automatically detect the specifications and capacity of the memory. En-
abling Four Channel memory mode will double the original memory bandwidth.
The eight DDR3 memory sockets are divided into four channels and each channel has two memory sockets
as following:
Channel A: DDR3_P0_A0, DDR3_P0_A1
Channel B: DDR3_P0_B0, DDR3_P0_B1
Channel C: DDR3_P0_C0, DDR3_P0_C1
Channel D: DDR3_P0_D0, DDR3_P0_D1
DDR3_P0_A0
DDR3_P0_A1
DDR3_P0_B0
DDR3_P0_B1
Due to CPU limitations, read the following guidelines before installing the memory in Four Channel mode.
1. Four Channel mode cannot be enabled if only one DDR3 memory module is installed.
2. When enabling Four Channel mode with two or four memory modules, it is recommended that
memory of the same capacity, brand, speed, and chips be used for optimum performance.
DDR3_P0_D1
DDR3_P0_D0
DDR3_P0_C1
DDR3_P0_C0
- 11 - Hardware Installation