Table of Contents
Advertisement
Exit
About This Section: Exit
Once you have changed all of the set values in the BIOS setup, you should save your
changes and exit BIOS setup program. Select "Exit" from the menu bar, to display the
following sub-menu.
Exit Saving Changes
This option allows user to exit system setup with saving the changes.
Press <Enter> on this item to ask for the following confirmation message:
Pressing 'Y' to store all the present setting values the user made in this time into CMOS.
Therefore, when you boot up your computer next time, the BIOS will re-configure your system
according data in CMOS.
Exit Discarding Changes
This option allows user to exit system setup without changing any previous settings values in
CMOS. The previous selection remain in effect.
This will exit the Setup Utility and restart your computer when selecting this option.
Figure 7: Exit
5 7
GA-6FXSV Motherboard
Advertisement
Table of Contents
