Console Redirection
Console Redirection
If this option is set to enabled, it will use a port on the motherboard to run console redirection
function.
On-board COM A
On-board COM B
Disabled
Flow Control
This option provide user to enable the flow control function.
None
XON/OFF
CTS/RTS
Baud Rate
Figure 5-2: Console Redirection
Use Serial Port A as the COM port address.
Use Serial Port B as the COM port address.
Disable this function. (Default setting)
Not supported. (Default setting)
Software control.
Hardware control.
5 5
GA-6FASV Series Motherboard