Connectivity; Infrared - Nokia 6101 - Cell Phone 4.4 MB User Manual

Start-up tone — to select whether the phone plays a start-up tone when the
phone is switched on

■ Connectivity

You can connect your phone to compatible devices using an infrared connection.
You can also define the settings for packet data dial-up connections.

Infrared

You can set up the phone to send and receive data through its infrared (IR) port. To
use an IR connection, the device with which you want to establish a connection
must be IrDA compliant. You can send or receive data to or from a compatible
phone or data device (for example, a computer) through the IR port of your phone.
Do not point the IR (infrared) beam at anyone's eyes or allow it to interfere with other IR
devices. Infrared devices are Class 1 laser products.
When sending or receiving data, ensure that the IR ports of the sending and
receiving devices are pointing at each other and that there are no obstructions
between the devices.
To activate the IR port of your phone to receive data using IR, select Menu >
Settings > Connectivity > Infrared.
To deactivate the IR connection, select Menu > Settings > Connectivity >
Infrared. When the phone displays Deactivate infrared?, select Yes.
If data transfer is not started within 2 minutes after the activation of the IR port,
the connection is cancelled and must be started again.
Copyright © 2005 Nokia. All rights reserved. 78