Safety Precautions For Power Supply Unit - HTC PURE AT&T Safety And Regulatory Information Manual

SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT

• Use the correct external power source
A product should be operated only from the type of power source indicated
on the electrical ratings label. If you are not sure of the type of power source
required, consult your authorized service provider or local power company.
For a product that operates from battery power or other sources, refer to the
operating instructions that are included with the product.
• Handle battery packs carefully
This product contains a Li-ion or Li-ion Polymer battery. There is a risk of
fire and burns if the battery pack is handled improperly. Do not attempt to
open or service the battery pack. Do not disassemble, crush, puncture, short
external contacts or circuits, dispose of in fire or water, or expose a battery
pack to temperatures higher than 60˚C (140˚F).
WARNING: Danger of explosion if battery is
incorrectly replaced. To reduce risk of fire or burns,
do not disassemble, crush, puncture, short external
contacts, expose to temperature above 60° C (140°
F), or dispose of in fire or water. Replace only with
specified batteries. Recycle or dispose of used
batteries according to the local regulations or
reference guide supplied with your product..
• Take extra precautions
•
Keep the battery or device dry and away from water or any liquid as it
may cause a short circuit.
•
Keep metal objects away so they don't come in contact with the battery
or its connectors as it may lead to short circuit during operation.