Complete Installation; Warning - Whirlpool WMC10007AB Installation Instructions Manual

Under-the-cabinet installation instructions
Hide thumbs Also See for WMC10007AB:
Table of Contents

Advertisement

Available languages

Available languages

NOTE: Although the microwave oven can be installed by one
person, we recommend having the aid of a second person for the
next step.
7. Gently lift the microwave oven to the cabinet bottom, until the
bolts emerge through the holes drilled into the lower shelf of
the cabinet.
A. Bolts
B. C-washers
8. Slide the slotted portion of each C-washer against each bolt.
These washers will temporarily hold the microwave oven while
installation is being completed.
9. Gently and evenly, tighten each of the bolts, until the
microwave oven is secure and level.
Properly installed, the microwave oven door will protrude in front
of the front surface of the cabinet.
Cabinet without trim
overhang
A
A. Bolts
B. Spacers
A
B
Cabinet with trim
overhang
B

Complete Installation

WARNING

Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Plug microwave oven into grounded 3 prong outlet.
2. Check the operation of microwave oven by placing 1 cup
(250 mL) of water on the turntable, and programming a cook
time of 1 minute at 100% power.
3. If the microwave oven does not operate:
Check that a household fuse has not blown, or that a
circuit breaker has not tripped. Replace the fuse or reset
the circuit breaker. If the problem continues, call an
electrician.
Check that the power supply cord is plugged into a
grounded 3 prong outlet.
See the Use and Care Guide for troubleshooting
information.
Installation is now complete.
Save Installation Instructions for future use.
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wmc10007aw

Table of Contents