Converting From Blower To Vacuum; Safety And Instructional Decals; Assembling The Blower - Toro 51574 - Rake & Vac 10.5 Amp Electric Blower/Vacuum Operator's Manual

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged or lost decals.
Setup
Register your product at www.Toro.com to ensure that Toro can
notify you in the case of a safety or warranty product recall.

Assembling the Blower

Important: The blower will not run unless the bottom inlet
cover is locked in place.
Converting from Blower to
Vacuum
WARNING
The impeller rotates for a few seconds after you turn
off the blower and can cut or injure fingers.
Do not remove the bottom inlet cover when the motor is
running or when the unit is plugged into a power outlet.
108-8987
1. Remove the inlet cover and the blower tube.
2. Install the vacuum tube and bag.
Important: The vacuum will not run unless the vacuum
tube is locked in place.
2