AUDIO TELEX TX3028 Instalation Instructions

TX3O28 VOICE OPERATED MUTING MODULE FOR THE
TX8zOO
I
NSTALLATION
I
NSTRUCTIONS
Thank you for
choosing
an
Audio
Telex
TX3028
voice
operatd
mute module.
The TX3028
allows
for muting of
background music
sources-
such
as a
CD player or
cassette deck when a signal is
detected at
ttre
microphure input Ch.
l,
(whici
is usuafy the paging
microphure input) in
the
TX8200
stereo
mixer.
Installation into
the
Audio
Telex fXgZOO
is
made simpiaby utilising
a standard
.e,nd,
!n9
col3ector plug,
sup'plied on the module and
a receptacle, already installed into
ttre
mixer.
pteasi
foU,ow these-easy instructions
for
installation.
g
The installation of the TX3028
involves-
acce:s
to tne insiae of the mixer.
Installation should only be attempted by
a
qualified technician. Always
turn off
the AC power and
remove
the
AC power
cord before attempting to
access the
inside
of the
mixer.
Please contact
your
nearest Audio
Telex ofiice for
detaiis of
your
nearest
qualified technician.
For installation into the
TX8200 mixer:
Locate the empty
9
pin 'end'
connector receptacle
found on location X3
on the
mixer
PCB
behind
tle
input gain pot for Ch.
l.
Connect the module to this
receptacle, ensuring that the
wires
from the
connector
exit
towards the
left
hand side of the mixer
when looking from
the front
panel
(oi
so that the
blie
trace on the wires from
the module
is
facing
the rear of
the
mixer).
Notes
The TX3028
is not suitable for
installation
into
any other models of Audio Telex mixers
or amplifiers. For
voice operated muting
suitable for
other models
please refer to
either the
TX30l0
module
or
TX30l4
dual
priority mutini
module.
I