AllerAir AirCarbon Cab Protector Specification Sheet

AirCarbon Cab Protector
This specially-designed air purifier was created
specifically to be mounted on the back of an
enclosed cab forklift or truck.
design, the AirCarbon Cab Protector contains 12 pounds of
activated Carbon to filter dangerous chemicals and odors in the
air. The Carbon blend can be customized upon order to remove
specific chemicals from the air.
As recommended by the Occupational Safety and Health
Administration (OSHA), a HEPA filter can be used to minimize the
exposure to dangerous airborne particles found in an industrial
setting, such as lead dust. The AirCarbon Cab Protector contains
a medical-grade HEPA filter that is 99.97% effective at filtering
particles as small as 0.3 microns. By using positive-pressure, it is
ensured that the only air that enters the cab is air that passes
through all of the filters in the model.
12 Volt DC
300 CFM @ 0.378 static
260 CFM @ 0.888 static
230 CFM @ 1.20 static
Toll free: 1-888-852-8247
12" x 26"
Unique to AllerAir's
12.65Amps.
11.85Amps.
11.10Amps.
Fax: 1-877-688-2193
3" FLEX HOSE
CLEAN AIR
3" FLEX HOSE
AIR PURIFIER
CLEAN AIR
Mounts on the rear or top of an
enclosed-cabin forklift
Contains 12
activated Carbon to remove
odors and chemicals
Customizable carbon blend
specific chemical environments
Uses an OSHA-recommended
Medical-Grade HEPA filter and
positive-pressure design
FILTERS
Refillable Carbon Canister 12 lbs.
Hepa Filter 55 x 18"
Documents on PDF/Sales Sheets/Forklif _unit/Nov 3, 2006
www.allerair.com
pounds of