AllerAir 600 Series Operation And Maintenance Manual

600 D, DX
FILTER ASSEMBLY-
Step 1
Step 2
Turn Power Off and
With a #2 Philips screw driver,
unplug receptacle.
remove the four screws from the
Lay unit upside down.
bottom of the unit.
Step 4 Step 5
Remove only one of the white, felt,
Insert the carbon filter (either a
donut-shaped gaskets from the Model 600 D Carbon or a Model 600
inside of the purifier body. DX Carbon) into the unit.
Step 7
Place lid back to its proper position
Step 8
by aligning the arrow with the rear
seam. Replace the four screws
Step 3
Gently grasp wheels.
Remove base by gently pulling on
the wheels.
Step 6
Replace the gasket that had been
removed in STEP 4.
Step 9
Turn the unit back onto its wheels.
It is now ready for immediate use.
AllerAir Industries Inc.
Model 600 Series
Operation and Maintenance Manual
Toll free: 1-888-852-8247 / Fax: 1-877-688-3939 www.allerair.com