Advertisement
-
For overhead use, always install a safety-rope that can hold at least 10 times the weight
of the fixture. You must only use safety-ropes with screw-on carabines. Pull the safety-
rope through the hole in the mounting bracket and over the trussing system. Insert the
end in the carabine and tighten the fixation screw.
-
Adjust the desired inclination-angle via the mounting bracket and fix the bracket screws
tightly.
-
For Pinspot with plug, Connect the fixture to the mains with the power plug.
Do not attempt to make any repairs yourself. This would invalid your warranty.
Do not make any changes to the unit. This would also invalid your warranty.
The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of
the warnings contained in this manual.
SkyTronic UK cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
Technical specifications:
Power supply: ....................................................................................... 230V 50Hz
Power consumption: ....................................................................................... 30W
Weight: .............................................................................................................1kg
Dimensions (LxWxH): .............................................................. 150 x 120 x 115mm
Fitting lamp:.................................................................................... 6V 30W Par 36
Advertisement
