Advertisement
Resuming a Set Speed
Suppose you set your cruise control at a desired speed
and then
you
apply the brake. This, of course, shuts off
the cruise control. But you don't need to reset it.
If you leave your cruise control switch on when
you're not using cruise, you might hit a button
and go into cruise when you don't want to.
You could be startled and even lose control.
Keep the cruise control switch OFF until you
want to use it.
1. Move the cruise control switch to ON.
2. Get up to the speed you want.
3. Push in the SET button
at the end of the lever
and release it. The
CRUISE light on the
instrument panel will
come on.
4. Take your foot off the
accelerator pedal.
WA (Resume/Accelerate)
for about half a second.
You'll go right back up to
your chosen speed and
stay there.
Increasing Speed While Using Cruise Control
There are two ways to go ,to a higher speed:
Use the accelerator pedal to get to the higher speed.
Press the button at the end of the lever, then release
the button and the accelerator pedal. You'll now
cruise at the higher speed.
0
Move the cruise switch from ON to WA. Hold it
there until you get up to the speed you want, and
then release the switch. To increase your speed in
2-30
1
1
Advertisement
