Finding A Station; Setting Preset Stations - Buick RENDEZVOUS NAVIGATION 2004 Owner's Manual

Finding a Station

BAND: Press this key to access the BAND screen and
to switch between AM, FM1, FM2, or XM1 and XM2,
if equipped. Each radio band has six station presets
accessible.
TUNE: Use the joystick in the lower left corner of the
navigation system to choose a radio station.
w x
SEEK : Press the up or the down arrow to go to
the next or to the previous station and stay there.
To scan stations, press and hold the SEEK up or down
arrow for two seconds until you hear a beep. The
radio will go to a station, play for a few seconds, then
go on to the next station. Press either SEEK arrow again
to stop scanning.
To scan preset stations, press and hold the SEEK up or
down arrow for more than four seconds. You will hear
two beeps and PSCAN will be displayed, along with the
highlighted preset. The radio will go to one of the
preset stations, play for a few seconds, then go on to
the next preset station. Press either SEEK arrow
again to stop scanning presets.
The radio will seek and scan only to stations that are in
the selected band and only to those with a strong signal.

Setting Preset Stations

The six multi-function keys located to the right of the
navigation screen, allow you to store your favorite
stations. You can store up to 30 stations (6 AM, 6 FM1,
6 FM2, 6 XM1 and 6 XM2, if equipped). To set preset
stations, do the following:
1. Turn the audio system on.
2. Press the BAND key to select the desired band
(AM, FM1, FM2, XM1 or XM2, if equipped).
3. Locate the desired station using the SEEK key or
the joystick.
4. Press and hold one of the six keys located to the
right of the navigation screen, until you hear a
beep. Whenever you press that key while in the
BAND menu, the station you set will return.
5. Repeat the steps for each preset and source.
3-3