Vessel Name - ACR Electronics PATHFINDER 3 SART (SEARCH AND RESCUE TRANSPONDER) Product Support Manual

To avoid possible fire, explosion, leakage or burn hazard, do not open,
recharge, disassemble, heat above +70°C (+158°F) or incinerate.
3.0

Vessel name

The SART label has a space where you should mark the vessel name (see Figure 3). This
can be done as follows . . .
Using an indelible pen
With an indelible pen, you can write the vessel name directly onto the SART. Note
however, that some indelible inks will fade when exposed to strong sunlight, so a ultra-
violet resistant pen is recommended.
If the full vessel name will not fit in the space provided, use a recognized abbreviation or
the vessel's call sign instead.
Approved for GMDSS use
WARNING:
Contains Lithium Battery
Name/Vessel Registration
Nom/Enregistrement De Navire
Vessel Name Here
Figure 3
7 Y1-03-0170 Rev. B