Table of Contents
Advertisement
4358-3340A Instrctions
11/15/04
4
5
WARNING
!
Failure to place harness over the metal bar
of the harness/headrest adjuster in back
can result in serious injury or death.
6
A
48
9:18 AM
Page 51
Pull harness through the
back. Make sure the
harness goes OVER the
headrest adjustment bar.
Fit loops on harness ends
onto the harness bracket.
Reinstall Base:
Remove bar from base.
Line up shell with base.
Begin with the rounded
end, push bar completely
through hole, starting on
the right side (A), until it
locks in place. Refer to
"Removal of Seat Base".
Remove Seat Pad for Cleaning
Remove base and harness as described in the
"Belt-Positioning Booster" section.
From bottom of shell,
1
release the elastic straps at
the bottom of seat and
the large elastic straps on
the side of seat.
Upper Harness Guides
Lower Harness Guides
Adjust backrest to lowest
2
position. Remove both
lower harness guides
A
in bottom of seat under
recline stand.
Push harness guide lip
toward outside of shell
with one hand while
pulling harness guide from
the front with the other.
49
(A)
Hide quick links:
Advertisement
Table of Contents
