Result Codes For A Manual Database Schema Update - VMware View Manager 4.5 Upgrade Manual

VMware View Upgrade Guide
3 Run the
SviConfig databaseupgrade
sviconfig -operation=databaseupgrade
For example:
sviconfig -operation=databaseupgrade -dsnname=LinkedClone
-username=Admin -password=Pass
A successful operation displays output that shows the upgrade steps.
Establishing database connection.
Database connection established successfully.
Upgrading database.
Load data from SVI_VC_CONFIG_ENTRY table.
Update SVI_DEPLOYMENT_GROUP table.
Update SVI_REPLICA table.
Update SVI_SIM_CLONE table.
SviConfig finished successfully.
Database is upgraded successfully.
4 Enter the command to start the VMware View Composer service.
net start svid
A complete log of the upgrade process is created.
Option
Windows Server 2003
Windows Server 2008
What to do next
If the database upgrade fails, see
page 29.
If the result code is any number other than 0, which means success, see
Schema Update,"

Result Codes for a Manual Database Schema Update

When you manually upgrade the View Composer database, the
displays a result code.
Table 5-1 shows the
Table 5-1. Result Codes for the databaseupgrade Command
Code Description
0 The operation ended successfully.
1 The supplied DSN could not be found.
2 Invalid database administrator credentials were provided.
3 The driver for the database is not supported.
4 An unexpected problem arose and the command failed to complete.
28
command.
-DsnName=<target database source name (DSN)>
-Username=<database administrator username>
-Password=<database administrator password>
Description
C:\Documents and Settings\All Users\Application Data\VMware
\View Composer\Logs\vmware-sviconfig.log
C:\Users\All Users\VMware\View Composer\vmware-sviconfig.log
"Troubleshooting a View Composer Database Upgrade Failure,"
on page 28.
sviconfig databaseupgrade
"Result Codes for a Manual Database
sviconfig databaseupgrade
result codes.
on
command
VMware, Inc.