VMware THINAPP 4.6 Manual page 132

ThinApp User's Guide
.
... 438 total calls
7847975891 total cycles (2809.64 ms): |sprof| ts_load_internal_module
764794646 cycles (273.80 ms) on log entry 21753
426837866 cycles (152.81 ms) on log entry 191955
408570540 cycles (146.27 ms) on log entry 193969
.
.
... 94 total calls
4451728477 total cycles (1593.76 ms): |sprof| ts_lookup_imports
544327945 cycles (194.87 ms) on log entry 21758
385149968 cycles (137.89 ms) on log entry 193970
187246661 cycles (67.04 ms) on log entry 190210
.
.
... 34 total calls
1099873523 total cycles (393.76 ms): |sprof| new_thread_start
561664565 cycles (201.08 ms) on log entry 151922
531551734 cycles (190.30 ms) on log entry 152733
1619002 cycles (0.58 ms) on log entry 72875
Potential Errors
The Potential Errors Detected section marks log entries that might post problems with three asterisks
(***). For information about interpreting this section, see "Locating Errors" on page 129.
----Potential Errors Detected ---
006425 0000075c
8.0\Reader\Microsoft.Windows.Common-Controls.DLL' flags=2 -> 0 (failed ***)
006427 0000075c
8.0\Reader\Microsoft.Windows.Common-Controls\Microsoft.Windows.Common-Controls.DLL' flags=2
-> 0 (failed ***)
006428 0000089c nview.dll :1005b94b<-kernel32.dll:7c80ae4b *** LoadLibraryW
->HMODULE=7c800000h () *** GetLastError() returns 2 [0]: The system cannot find the file
specified.
007062 0000075c
8.0\Reader\en-US\Microsoft.Windows.Common-Controls.DLL' flags=2 -> 0 (failed ***)
010649 0000075c
8.0\Reader\en-US\Microsoft.Windows.Common-Controls\Microsoft.Windows.Common-Controls.DLL'
flags=2 -> 0 (failed ***)
019127 0000075c MSVCR80.dll :781348cc<-msvcrt.dll :77c10396 *** GetEnvironmentVariableA
->DWORD=0h (OUT LPSTR lpBuffer=*0h <bad ptr>) *** GetLastError() returns 203 [0]: The system
could not find the environment option that was entered.
019133 0000075c MSVCR80.dll :78133003<-nview.dll :1000058c *** GetProcAddress
->FARPROC=*0h () *** GetLastError() returns 127 [203]: The specified procedure could not be
found.
019435 0000075c MSVCR80.dll :78136e08<-dbghelp.dll :59a60360 *** Getfile type
->DWORD=0h ()*** GetLastError() returns 6 [0]: The handle is invalid.
019500 0000075c MSVCR80.dll :78134481<-nview.dll :1000058c *** GetProcAddress
->FARPROC=*0h () *** GetLastError() returns 127 [0]: The specified procedure could not be found.
019530 0000075c MSVCR80.dll :78131dcd<-dbghelp.dll :59a603a1 *** GetModuleHandleA
->HMODULE=0h () *** GetLastError() returns 126 [0]: The specified module could not be found.
Troubleshooting Example for cmd.exe Utility
In the troubleshooting example, ThinApp packages the cmd.exe utility with logging turned on. The example
shows how you can simulate application failure by running an invalid command. If you request the cmd.exe
utility to run the foobar command, the utility generates the foobar is not recognized as an internal
or external command message. You can scan the trace file and check the Potential Errors Detected
section to find the API functions that modified the GetLastError code.
The example shows the C:\test\cmd_test\bin\foobar.*, C:\WINDOWS\system32\foobar.*, and
C:\WINDOWS\foobar paths as the locations where the cmd.exe utility looks for the foobar command.
132
LoadLibraryExW 'C:\Program Files\Adobe\Reader
LoadLibraryExW 'C:\Program Files\Adobe\Reader
LoadLibraryExW 'C:\Program Files\Adobe\Reader
LoadLibraryExW 'C:\Program Files\Adobe\Reader
VMware, Inc.