Table of Contents
Advertisement
Configuring VCM for Integration
The integration with ADM is built into VCM. To configure the integration with ADM, you only need to
configure the ADM integration settings.
Configuring VCM Integration Settings
Before you can use the ADM integration options, you must configure the settings.
1. In VCM, Select the setting to be configured, and then click Edit Settings.
2. The Settings Wizard page appears. The information to be configured in the wizard varies depending
on selected setting. The configuration options are as follows:
ADM Integration Enabled
n
Select Yes to enable the integration or No to disable the integration.
n
If enabled, the View ADM Detail and View ADM Map buttons become active when you
n
are working with machine data, for example, Console | Windows | Operating Systems
| Machines.
If the setting is enabled, the ADM Reporting Database Name and ADM Server Name
n
or IP Address must also be configured.
ADM Reporting Database Name
n
Type the name of the SQL database created on the Collector to synchronize with the
n
ADM database. The default value is ADM.
ADM Server Name or IP Address
n
Type the IP address or server name of the ADM server.
n
Maximum number of hosts that may be submitted to ADM Map View
n
Type the maximum number of machines/hosts to display when you select the View
n
ADM Map button. While 10 is the default value, it is recommended that you only view 3
or 4 devices in a map view. If you view more than 4 devices, the displayed map is too
complex to be useful.
3. Verify your settings. Click Finish. The settings are applied.
N
You must either press F5 to refresh the Console, or log out and log back in to view the active
OTE
buttons.
VMware, Inc.
2
9
Advertisement
Table of Contents
