Making Vcm Aware Of Vcm Remote Clients; Configuring Vcm Remote Settings; Creating Custom Collection Filter Sets; Specifying Custom Filter Sets In The Vcm Remote Settings - VMware VCENTER CONFIGURATION MANAGER 5.3 Getting Started Manual

vCenter Configuration Manager Installation and Getting Started Guide
Run Action now: This option immediately installs VCM Remote Client on the target machines.
n
Schedule the Action to run later: This option allows you to specify the Time and Date for the
n
installation.
N The job appears in the Instant Collection job history queue as Install CM Remote Client.
OTE
16. Click Next. When you are ready to proceed, click Finish.

Making VCM Aware of VCM Remote Clients

After the VCM Remote Client is installed, the client contacts the collector when connected to the network.
The default VCM Remote setup enables VCM Remote to automatically contact the Collector, auto-license
the machine, install or upgrade the base VCM Windows Agent, and determine whether it should submit a
VCM collection job for that machine. In addition, VCM Remote resubmits failed deployment jobs if you
are using other VCM components for your patch management processing.
This process is automated based on VCM Remote Settings and other than configuring the settings,
requires no operator interaction.

Configuring VCM Remote Settings

Once the VCM Remote client and server components have been installed successfully, you need to collect
from, or push patches to, the mobile Windows workstations. You must configure the following:
Create custom Collection filter sets to be used when a mobile workstation connects using Dial-up,
n
Broadband, or LAN. We recommend a different Filter Set for each connection type. See
Custom Collection Filter Sets" on page 156
In the VCM Remote settings, enter the names of the filter sets to be used for each type of connection.
n
See "Specifying Custom Filter Sets in the VCM Remote Settings" on page 156

Creating Custom Collection Filter Sets

If you have not created any Collection filter sets, you can specify the default set. However, this is an all-
encompassing collection that would likely not be able to complete over a dial-up connection. Therefore,
you should create filter sets customized to the type of connection that might be used by the mobile
workstations: Dial-up, Broadband, or LAN. For example, the dial-up set might be limited to only a few
high-importance items and would not include the File System Uploads or Emergency Repair Disk data
classes.
1. In VCM, select Administration | Collection Filters | Filter Sets.
2. Select Add Filter Set.
3. Construct a filter set appropriate for the connection type. Use the Help available in the Filter Set
Wizard to configure the filter set.

Specifying Custom Filter Sets in the VCM Remote Settings

For a Collection of the client machine to take place, a Collection Filter Set must be created and its name
entered into VCM. You can, of course, enter Default for the automatically-created default set. The same or
different Filter Set names can be assigned to each of the three connection types: Broadband, Dialup, and
LAN. For instance, if the connection speed is only that of Dialup, you might want to create a smaller Filter
Set. If a connection type does not have a Filter Set name assigned, no Collection will be initiated when the
connection is at that speed.
156
for more information.
"Creating
for more information.
VMware, Inc.