Brother hl 1650 - B/W Laser Printer Service Manual page 133

NOTE:
When re-assembling the paper eject actuator and the eject actuator spring to the FU frame
lower, ensure the paper eject actuator is seated correctly in the locating channel referring to
the figure below;
Paper eject actuator
(22) Release the thermistor harness from the hooks on the FU frame upper and then remove
the one cup B M3x12 Taptite screw and remove the thermistor ASSY.
(hooks)
&+$37(5  ',6$66(0%/< $1' 5($66(0%/<
FU frame lower
Fig. 4-62
FU frame upper
(hook)
Fig. 4-63
4-35
Eject actuator spring
Thermistor ASSY
Taptite, cup B M3x12