Binatone CONCEPT COMBO 2310 User Manual page 43

If you're using a CC2310 multi-handset system, check
"When I try to
make a call, I hear
whether other handsets are already on a call.
Busy tone."
"The volume in the
Make sure you're holding the earpiece correctly over your
earpiece is low
ear.
when I'm on a call"
Adjust the volume using the UP/DOWN button.
Intercom and transfer
"I can't transfer a
Make sure the other handset is in range of the base unit.
call"
Make sure you are dialling the correct number for the other
handset.
If the fault persists...
Disconnect all other instruments connected to the same
line as the CC2310 and try to make a call
Disconnect the base unit from the telephone line and plug
a different phone into the master telephone socket. Try
making a call. If this works, the line is OK.
If the call does not work, and you are using a two-way
socket adapter, remove it and plug a telephone directly into
the socket. If the call now works, the adapter may be faulty.
If you cannot make a call, the fault may be on the exchange
line. Contact the service provider (the BT engineers on 151
for UK only, or your cable company).
If you still cannot identify the cause of the problem, contact
the Binatone on 0845 345 9677 (UK only).
Binatone Help Line : 0845 345 9677
41