To Delete A Message In Tam; To Delete All Messages On Tam; To Change Security Code (Tam Pin) - Binatone CONCEPT COMBO 2310 User Manual

To delete a message on TAM
Press the DELETE while a message is playing. You will hear
DEL "MESSAGEDELETED"and the current or memo playing will be
adeleted, and if there are more messages the next message will start to play.

To delete all messages on TAM

Press and hold DELETE for 2 seconds at any time to delete all old messages.
DEL You will hear "ALL MESSAGES DELETED", and all old messages
will be deleted.
NOTE: You cannot delete New Messages, so you will have to start to play
them before trying to delete them.

To Change Security Code (TAM PIN)

The security code is used to access the remote control or default the TAM,
and is a 4-digit code. The default code is "0000".
Press the MENU/OK/MUTE. Scroll UP until "TAM", press the
MENU/OK/MUTE and you will see "MESSAGE".
Scroll UP until the display shows "TAM SETTINGS". Then press the
MENU/OK/MUTE and you will see "TAM ON/OFF".
Scroll the DOWN until the display shows "TAM PIN". Then press the
MENU/OK/MUTE and the display will show the current setting "0000".
Use the keypad to enter the new security PIN code.
Press the MENU/OK/MUTE and you will hear a beep. This display will
return to the previous menu.
Press the PHONE BOOK/BACK until you return to idle mode.
Binatone Help Line : 0845 345 9677
32